Jointing
Method for PVC Nahani Trap-PVC Pipe/Fittings
Step
1:
Apply jointing lubricant on the rubber ring already inserted in the groove of the fittings and also on the outlet of the Nahani Trap's chamfered end.
Step
2:
Push-fit the Nahani Trap
straight into the pipe / fitting.
European
WC* 'P' Trap- PVC Straight WC Connector
Step
1:
European WC with 'P' trap
Step
2:
Make sure the spigot and socket are thoroughly
clean and dry.
Step
3:
Place lip-ring on the socket
end of the WC Connector and then apply rubber
lubricant over the inside portion of the
lip-ring.
Step
4:
Push-fit the WC Connector
over the outlet of the EWC 'p' trap.
European
'S' Trap-PVC Bend WC Connector
Step
1:
European WC with 's' Trap.
Step
2:
Bend WC Connector with
lip-ring and rubber lubricant.
Step
3:
Place rubber ring over
the socket of the Bend WC Connector and
apply rubber lubricant over the inside portion
of the lip-ring.
Step
4:
Push-fit the Bend WC Connector
over the outlet of the EWC 's' trap.
Note
Every care has been taken to see that the
information given in this page is correct
and current but is not intended to form
any part of any contract. No warranty is intended to be given or
implied in respect of the contents thereof.
